A small add-on for CrossPoint Reader: mark where you stopped reading with a realistic folded page corner ("dog-ear") instead of the tiny bookmark icon.
Tested on the Xteink X4 Pro with CrossPoint 2.0.0. The X3/X4 build is new and not tested on a device yet. Feedback welcome.
This repository does not contain a copy of CrossPoint. A GitHub Action takes every new official CrossPoint release, adds the dog-ear and publishes the finished firmware under Releases.
| Device | File |
|---|---|
| Xteink X4 Pro | crosspoint-<version>-x4pro.bin |
| Xteink X3 and X4 (one file for both) | crosspoint-<version>-x3-x4.bin |
One dog-ear per book. It is stored like a CrossPoint bookmark, so it survives font, margin and orientation changes. In the settings the function is called Dog-ear.
The finger places the dog-ear, the Home key takes you back to it.
| Action | Result |
|---|---|
| Long press the top-right corner | Folds the corner on this page. An older dog-ear moves here. |
| Tap the dog-ear | Removes it |
| Long press Home, no dog-ear yet | Folds the corner on this page |
| Long press Home, dog-ear on another page | Jumps to the dog-ear |
| Long press Home on the dog-ear page | Nothing changes (short vibration) |
A long press never removes a dog-ear by accident. Removing is always a deliberate tap.
Two keys, each with one job. Both react on the first press, without waiting.
| Key (set in Settings → Controls) | Result |
|---|---|
| Confirm long press → Dog-ear | Folds the corner on this page. An older dog-ear moves here. On the dog-ear page: removes it. |
| Power short press → Go to Dog-ear | Jumps to the dog-ear. On the dog-ear page, or with no dog-ear yet, nothing happens. |
No pop-up messages: on e-ink every message costs extra screen refreshes, and the folded corner speaks for itself.
On all devices, Reader menu → Toggle Dog-ear works too.
- Open the latest release and download the file for your device (see the table above).
- Install it, either way works:
- SD card: copy the file to the root of the SD card, then on the reader go to Settings → SD Card Firmware Update and pick the file.
- USB: go to https://crosspointreader.com/#flash-tools in Chrome or Edge, choose your device, then Custom .bin, and upload the file.
After that, Settings → Check for Updates on the reader installs new versions from this repository, so updates keep the dog-ear.
The dog-ear needs a key. None is assigned by default.
X4 Pro
- Settings → Controls → Home Button Gestures → Long Press → Dog-ear
- Settings → Controls → Touch Reader Controls → On (for long press and tap on the corner)
X3 / X4
- Settings → Controls → Long-Press Menu → Dog-ear (Confirm long press: set and remove)
- Settings → Controls → Short Power Button Click → Go to Dog-ear (Power short press: jump)
All devices, optional: Settings → Reader → Text Anti-Aliasing: off gives the fastest page turns. The dog-ear looks the same either way.
The dog-ear has a fixed size and look on purpose: about a fifth of the screen width, a flat dark corner, a white flap with a fine outline and a solid black shadow. Everything is drawn in pure black and white dots, so nothing from the previous page shows through on e-ink.
It uses no extra memory: the corner is recalculated with simple integer math on each page draw, which takes only a few milliseconds even on the X3/X4's small chip.
- The Action runs every night. When CrossPoint publishes a new release, a matching release appears here.
- To build by hand: Actions → Build CrossPoint with dog-ear → Run workflow (tick force to rebuild a version that already exists).
- If CrossPoint changes the code the patch hooks into, the build stops with a message that
names the spot (
DOG-EAR PATCH FAILED: ...). GitHub sends an email; thenpatch/apply_dogear.pyneeds an update. If only one device fails, the other one is still published.
patch/files/DogEarPaint.h: drawing of the folded corner (no hardware code, can be previewed on a PC)patch/files/DogEar.h: connects the drawing to the CrossPoint renderer and the jumppatch/apply_dogear.py: adds the dog-ear to a CrossPoint source tree.github/workflows/build.yml: nightly build and release for both devices
Self-built firmware does not include the official release key for CrossPoint's LCP service (only relevant for LCP-protected books from that service). Everything else works as in the official release.
MIT licensed, like CrossPoint.
