Open-source, Linux-based, SDR handheld transceiver
LinHT is an open-source handheld software-defined radio (SDR) transceiver, built as a replacement mainboard for the Retevis C62 radio. A Linux System-on-Module runs the UI, DSP and radio control, and a direct-IQ RF front-end gives true all-mode operation. There is no FPGA in the signal path.
It is the successor of the OpenHT project, developed by the M17 community for radio amateurs, SDR experimenters and developers. This repository contains the hardware design files.
📅 November 2026 status
Rev C is the current revision onmain.
Please see the Rev C status report.
⚠️ Important
LinHT is an experimental, community-driven project, not a consumer product.
- SoM: CompuLab MCM-iMX93 (dual Cortex-A55, Cortex-M33, 2 GB LPDDR4, 32 GB eMMC)
- RF: Semtech SX1255 direct-IQ transceiver, up to 500 kHz bandwidth, 📌 UHF only
- TX power: about 4.5 W CW (measured on Rev B)
- Software: custom Yocto Linux with GNU Radio, SoapySDR, C/C++ and Python
- Modes demonstrated so far: ✅ FM, ✅ SSB, ✅ M17, ✅ TETRA (RX), 🧪 experimental 64-QAM
The full component list, revision history and RF details are on the LinHT wiki page. Changes between hardware revisions are listed in the changelog.
- Images: m17project.org/linht
- Flashing and first steps: LinHT wiki page and LinHT Image Manual
- Building images: LinHT Image Build
- Software: LinHT-utils, libsx1255, liblinht-ctrl and the Yocto layers meta-linht-hardware, meta-linht-software, meta-linht-sdr
LinHT cannot be bought yet. To build one you need to have the PCB made, source and assemble the components, and move these parts over from a Retevis C62 donor radio: enclosure, display, keypad, battery, side-button PCB, SMA connector, audio jacks, rotary encoder, springs and mechanical hardware.
The repository holds the KiCad 10.0 project. Gerbers, BOM, pick-and-place files,
schematics and 3D models are generated by GitHub Actions and published on
GitHub Pages. They follow main, so
they currently show the unvalidated Rev C design. Use the revA and revB Git
tags for earlier revisions.
An older, Rev A focused build write-up: LinHT Open SDR Handheld For Radio Amateurs
❓ Is it suitable for everyday use? Not yet. Expect no polished UI, no certification and no warranty. It suits developers and experimenters comfortable with Linux and hardware debugging.
❓ Does it support VHF? No. The current revisions are UHF-only, and VHF is not planned for now.
❓ Is it legal to transmit with? LinHT is not certified. It is intended for amateur radio, experimental licenses and lab use, and the builder and operator are responsible for following local regulations.
Join the M17 Discord, channel #linht, to discuss ideas, coordinate work and ask questions. Help is especially welcome with Yocto recipes, the device tree, drivers, CI, testing, RF/DSP experiments and documentation. Issues in this repository are welcome too.
This project is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International license.
LinHT is developed by the M17 community, with contributions from many individuals. Thanks to everyone testing prototypes, reviewing schematics, writing software and sharing ideas.
