diff --git a/Drivers/v4net.device/2.99-beta/Devs/NetInterfaces/V4Net b/Drivers/v4net.device/2.99-beta/Devs/NetInterfaces/V4Net
deleted file mode 100644
index 12e4a5e..0000000
--- a/Drivers/v4net.device/2.99-beta/Devs/NetInterfaces/V4Net
+++ /dev/null
@@ -1,59 +0,0 @@
-# $VER: V4Net 1.0 (23.01.2020)
-#
-# Configuration for the Vampire V4 internal Ethernet
-
-# The device name is mandatory
-device=v4net.device
-
-# If not provided, unit number 0 will be used. You may
-# have to change this if there are multiple cards of the
-# same type installed in your machine, or if your network
-# hardware supports several independent connections
-#unit=0
-
-# You must either pick a fixed (static) IPv4 address and
-# a corresponding subnet mask, or request DHCP (dynamic)
-# network address configuration.
-# You can combine address/netmask/dhcp, which has the effect
-# of asking the DHCP server to assign the requested IPv4
-# address and subnet mask to this interface, if possible.
-#address=192.168.10.10
-#netmask=255.255.255.0
-configure=dhcp
-
-# If no DHCP server is present in your network, you can
-# use automatic interface IPv4 address assignment through
-# the ZeroConf protocol. Note that this will not set up
-# default route and DNS servers for you, only the interface
-# address is configured.
-#configure=auto
-
-# This variant of automatic IPv4 address assignment should
-# be used in a wireless network instead of 'configure=auto'
-#configure=fastauto
-
-# You can enable diagnostic messages which can be helpful in
-# tracking down configuration errors.
-#debug=yes
-
-# You can choose how much memory will be used when handling
-# incoming and outgoing network traffic for this device.
-# The default is to reserve 32 buffers of 1500 byte each, both
-# inbound and outbound traffic. Larger values may provide
-# better performance.
-iprequests=48
-#writerequests=32
-
-# For diagnostic and monitoring purposes it can be helpful to
-# capture network traffic that flows through this interface.
-# To enable this option, select one of filter=local,
-# filter=ipandarp or filter=everything
-#filter=local
-#filter=ipandarp
-#filter=everything
-
-# This option disables a workaround required for the Ariadne
-# network hardware, which, if enabled, would otherwise cause
-# the interface setup procedure to take longer than really
-# necessary.
-requiresinitdelay=no
diff --git a/Drivers/v4net.device/2.99-beta/Devs/NetInterfaces/V4Net.info b/Drivers/v4net.device/2.99-beta/Devs/NetInterfaces/V4Net.info
deleted file mode 100644
index f8e705f..0000000
Binary files a/Drivers/v4net.device/2.99-beta/Devs/NetInterfaces/V4Net.info and /dev/null differ
diff --git a/Drivers/v4net.device/2.99-beta/Devs/Networks/v4net.device b/Drivers/v4net.device/2.99-beta/Devs/Networks/v4net.device
deleted file mode 100644
index 7e5320c..0000000
Binary files a/Drivers/v4net.device/2.99-beta/Devs/Networks/v4net.device and /dev/null differ